Drum chipper raw materials can be: logs, branches of wood, plate skin, waste veneer, bamboo, cotton and other non-wood fiber rods and so on. These materials can be cut into different specifications of the wood chips. As the production of particleboard, fiberboard, non-wood-based panel and pulp and paper the basic raw materials. Drum chipper series of products is the production of wood chip special equipment, this product is widely used in particleboard factory, medium and high density fiberboard plant, straw plant, biological power plant, wood chip factory and other production and production of spare parts Pre-selected device. The product structure is advanced, cutting sheet material is high quality, raw material adaptable light, easy operation and maintenance. The main raw materials for cutting are small diameter wood, wood cutting, processing residues (such as branches, branches, plate, slats, round wood core, waste veneer, etc.), can also be used to cut non-wood raw materials (such as sugar cane, reed, Wait).
The structure of the drum chipper: base, knife roll, feeding roller, conveyor belt, hydraulic system and other parts of the composition of the drum chipper body structure. Drum-type chip machine is made of high-cavity plate welded together, is the basis of the entire drum chipper part of the support; in the drum wood slicer installed on the two Flying. Using a knife for the drum chipper to build the knife bolts, through the pressure block will be fixed on the knife roll; this design can be cut according to the different raw materials, the feed roller can be used within a certain range of hydraulic system Floating up and down, you can achieve the cutting of different specifications of the effect of wood chips.
 
Features:
Drum chipper series of products is the production of wood chip special equipment, this product is widely used in particleboard factory, medium and high density fiberboard plant, straw plant, biological power plant, wood chip factory and other production and production of spare parts Pre-selected device. The product structure is advanced, cutting sheet material is high quality, raw material adaptable light, easy operation and maintenance. The main raw materials for cutting are small diameter wood, wood cutting, processing residues (such as branches, branches, plate, slats, round wood core, waste veneer, etc.), can also be used to cut non-wood raw materials (such as sugar cane, reed, Wait). Machine by the body, knife roll, feeding roller up and down, conveyor belt, hydraulic system and other components. The body is made of high-strength steel plate welding, is the basis of the whole machine support. Knife roll on the installation of two or three, four Flying, with a special manufacture of flying knife bolts, through the pressure block, the knife fixed on the knife roll. Depending on the thickness of the material being cut, the upper feed roll assembly can float up and down within a certain range by means of a hydraulic system. The cut sheet of qualified material falls through the screen hole and is discharged from the bottom, and the large sheet material will be cut in the machine. Hydraulic system: from the pump to the cylinder, you can start the cover, easy to replace the blade; in the maintenance can be lifted on the feed roller assembly, easy to adjust the knife, the end of the gap and comb board disassembly.
Drum chipper technical parameters
Model PJ-215 PJ-216 PJ-218
Inlet Size(mm) 160*400 230*590 300*680
Flying Knife No. 2 2 2
Blade Roll Speed(r/min) 590 590 650
Chip Size(mm) 30 30 30
Capacity(t/h) 3-5 8-10 14-18
Main Motor Power(Kw) 4-45 4-55 4-110
Feeding Power(Kw) (2.2-3)*2 (3-4)*2 (4-5.5)*2
Pump Power(Kw) 1.5 1.5 1.5
Conveyor Power(Kw) 3 3 4
Weight(kg) 2990 5030 7000
Dimension(mm) 1470*1550*970 1800*1900*1210 2200*2150*1500

pre:none next:Disc chipper

Copyright © 2013-2016 Power By Shanghai Pioneer Machinery Manufacturing Co., Ltd.