In recent years, with the rapid development of rubber manufacturing industry, increasingly scarce raw rubber, how to effectively use the waste rubber has become a global problem to be solved, and some rely on the purchase of expensive or high-power inefficient equipment , The investment cost is too high, and some use of the original sawdust processing of waste rubber for recycling, but because of low production efficiency and can not achieve the corresponding economic value has not been popularized. The rubber shredder, also known as the intelligent biaxial shredder, achieves reduced material size by shearing, tearing and squeezing. Our production of SX series of shredders is after years of research and practice, and in accordance with the actual situation to improve research and development, the introduction of mature technology and advanced design of the biaxial shredder series for China's waste recycling early reduction, Accommodating to provide reliable equipment. Equipment processing range from small pieces of rubber scraps of large tire torn out, after the replacement of the blade for metal, plastic, wood and other waste materials can be broken production.

Rubber shredder crushing range

Plastic, paper, chemical fiber cloth, cotton, soles, , Upper, woven bags and so on.
Rubber shredder performance characteristics:
1: heavy knife, high crushing efficiency, the tool is made of alloy steel casting, strong long service life.
2: frame plate thick, high torque resistance, very strong.
3: the use of microcomputer (PLC) automatic control, set the start, stop, reverse and overload automatic reverse control function.
4: equipment with low speed, high torque, low noise, dust can meet the characteristics of environmental standards.
5: easy to adjust, low maintenance costs, economic and durable.
6: The thickness of the tool and the number of knives can be replaced according to different materials.
working principle
In the working principle of waste rubber shredders to single-axis, double-axis or four-axis as the device crushing mechanism with a fixed knife to form a broken angle, driven by the motor in the reducer after the angle between the shaft changes and tear The pressure of the tool blade is pressed into the shaft angle, and the radial pressure is generated under the reduced angle of the shaft. Under the action of the pressure of the radial pressure and the tearing of the blade, Fissure to form small pieces of granular, through the rubber shredder at the bottom of the screen screening effect of the size of the particles by the bottom of the shredder out of the screen does not meet the size of the particles are re-sent to the angle between the shaft and set the knife again Broken processing. In the whole process of crushing we usually 50 * 50 mesh screen as rough selection structure, in line with the requirements of the size (50 × 50) rubber block can be re-enter the rubber crusher into 6-12mm rubber particles, if you want to further broken But also the use of rubber grinding equipment on the rubber particles for further milling operation.
Technical Parameters
Model Main shaft Power(kw) Main shaft speed(r/min) Capacity Conveying power Shovel plate qty Shovel plate diameter Crushing size Silo size Long x wide x high Weight
PJ-2600 4-160*2 16-18 25-60 4-3kw 40 Φ720 3-10 2.5*1.4 8.2*4*4.3 36
PJ-1900 4-90*2 14-16 10-25 4-3kw 40 Φ560 3-10 2.3*2 8*2.5*2.4 15
PJ-1500 4-45*2 14-16 8-18 4-3kw 30 Φ530 3-10 2*2 4*1.7*2.4 12
PJ-1200 4-37*2 18-20 6-15 none 28 Φ372 3-10 1.4*1 3.2*2*1.9 6
PJ-1000 4-30*2 18-20 5-10 none 30 Φ360 3-10 1.2*1 3*2*1.9 5
PJ-600 4-15*2 18-20 2-5 none 26 Φ260 3-10 0.82*0.9 2.6*2*1.9 2.5

Copyright © 2013-2016 Power By Shanghai Pioneer Machinery Manufacturing Co., Ltd.